Layer 1 Sold Out

Epilog Zing 24 Laser

$10,995.00 MSRP: Sale price $15,400.00 $10,995.00 Sale

Wattage:

For unavailable wattages, please contact your distributor

Currently Out of Stock
Add on Accessories:
Zing 24 Vector Cutting Grid
($370)
DC3 Portable Exhaust Unit
($340)
FiltraBox Compact - Laser Fume Filtration
($3,250)
Zing Air Assist Pump
($300)
Zing 24 Rotary Attachment
($995)


Out of Stock


The Epilog Zing Laser starter series is Epilog's small format, high-quality engraving line. The perfect desktop laser cutter for everything from home use to starting a business, the Zing Laser provides high-quality engraving and cutting, at a low cost.


Epilog's smallest laser, the Zing 24 laser machine, features a 24" x 12" (610 x 305 mm) work area with 30, 40, 50, and 60-watt laser options. You can buy it now with either a 40 or 60 watt laser source. 


And we're proud to say the Zing Lasers are 100% designed, engineered and built in the USA!

  • Description
  • Material Capabilities
  • Technical Specs
  • Accessories
  • Model Comparison

The Epilog Zing Laser starter series is Epilog's small format, high-quality engraving line. The perfect desktop laser cutter for everything from home use to starting a business, the Zing Laser provides high-quality engraving and cutting, at a low cost. It also is the smallest of our lasers that accommodates the Rotary Attachment for engraving wine bottles, mugs, tumblers and more.

 

The Zing 24 laser features a 24" x 12" (610 x 305 mm) work area, and a motorized table that allows you to engrave items up to 7.75" (197 mm) in thickness.  Engrave and/or cut marble, glass, acrylic, wood, plastic, and much more!

 

Wattage Options

Higher wattages allow you to run the laser at higher speeds to engrave to the same depth on materials, and you can also cut through thicker materials in a single pass. The Helix is available with 30, 40, 50, 60, and 80-watt laser options. You can buy it online with a 40 or 60-watt laser source, or any of the wattages through your distributor

 

Do I need the Exhaust and/or Filtration System Accessory? 
All lasers need to either exhaust to the outside or use an internal filtration unit to clean the air of dust and debris, so you can either use a filtration or exhaust unit listed above, or source one on your own. The Zing 24 laser recommends an exhaust fan that is rated at a minimum of 350 CFM for external exhaust. Factors such as length and type of tubing from the Epilog laser to the exhaust fan and from the exhaust fan to the outside of the building can produce significant losses on the true amount of air that is drawn from the Epilog laser.The D3 Portable Exhaust Unit will require metal ducting leading to and from the laser system and exhaust fan. It attaches to a 4" exhaust port on the back of the laser system. 

 

We have two available ventilation options online:

 

 

Shipping

All machinery is shipped in 1-2 weeks with a lift gate. 

 

Training

Online training is included with the system through the Epilog Laser Training Suite that walks you through setting up your system, basic laser design concepts, and maintenance tips and tricks. For in-person training, please contact the distributor in your area to purchase additional training packages. 

 

Is additional cooling required? 

No, we use air-cooled CO2 lasers, so no additional cooling is required. The use of the metal/ceramic laser design allows us to fire the laser at higher speeds than other technology and provides a longer life on the tube before recharging is needed. 

 

How do I get support? 

Epilog's lasers come with a 2-year warranty that covers all parts of the system, including the laser tube. If you have an issue with your system, you'll call our Technical Support department, and they will help to diagnose the problem and ship the parts out to you. The machines are designed so they can be repaired easily by you, and the easy, step-by-step video instructions on the Training Suite walk you through replacement of many parts of the machine. Even after your warranty has expired, lifetime phone assistance is provided for the machines. 

 

Where is the system manufactured? 

We're proud to say all Epilog Lasers are 100% designed, engineered and built in the USA at our global headquarters in Golden, CO.

 

Why should I work with my distributor instead of buying online? 

If you need additional help purchasing a machine, there is no one more experienced with our equipment than our distributors. They are our local contact for you and are able to assist you with in-person demonstrations, selecting the right machine for you, applications testing, and much more. They also have the full range of Epilog machinery available for purchase. You can find your distributor by clicking here.

 

I can't purchase with a credit card.

Your distributor can take a variety of payment options, including PO's and helping to set up lease payments. You can also use Paypal to send funds directly from a bank account. 

 

I have more questions!

Contact us at 303-277-1188 and we'll be happy to answer any questions you have. If you're not ready to buy today, fill out the form on our website and we'll send you a full product line brochure and sample kit. 

The higher the wattage, the thicker the materials you can cut through and the faster you can run the laser to get to the same engraving depth. A 30/40-watt laser source cuts up to 1/4" thick hardwoods and acrylics in a single pass. A 60-watt laser source cuts up to 3/8" thick hardwoods and acrylics in a single pass.

MaterialEngraveCut
 Woodxx
Acrylicxx
Fabricxx
Glassx 
Coated Metalsx 
Ceramicx 
Delrinxx
Clothxx
Leatherxx
Marblex 
Matte Boardxx
Melaminexx
Mother of Pearlxx
Paperxx
Mylarxx
Pressboardxx
Rubberxx
Wood Veneerxx
Fiberglassxx
Painted Metalsx 
Tilex 
Plasticxx
Corkxx
Corianxx
Anodized Aluminumx 
Stainless Steel* 
Brass* 
Titanium* 
Bare Metals* 
* CO2 lasers will mark bare metals when coated with a metal marking solution. For more information, visit our laser metal marking page.
Do you have a material you would like us to test? Our Applications Team would be happy to assist you.
Technical Specifications
Engraving Area24" x 12" (610 x 305 mm)
Max Material Thickness7.75" (197 mm)
Laser Wattage30, 40, 50, or 60 watts
Laser SourceState-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.
Intelligent Memory CapacityMultiple file storage up to 64 MB. Rolling buffer allows files of any size to be engraved.
Air AssistAttach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.
Laser DashboardThe Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages.
Red Dot PointerSince the laser beam is invisible, the Red Dot Pointer on Epilog's Zing Laser allows you to have a visual reference for locating where the laser will fire.
Relocatable HomeWhen engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position feature on the Zing Laser.
Operating ModesOptimized raster, vector or combined modes.
Motion Control SystemHigh-speed micro stepper motors.
X-Axis BearingsShielded Roller Bearing Assembly on a Ceramic Coated Aluminum Guide Rail.
BeltsAdvanced B-style Kevlar Belts.
ResolutionUser controlled from 100 to 1000 dpi.
Speed and Power ControlComputer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color.
Print Interface10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8/10.
Size (W x D x H)38" x 27.25" x 15" (965 x 692 x 381 mm)
Weight140 lbs (64 kg)
Electrical RequirementsAuto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase.
Maximum Table WeightThe Zing 16 and 24 have a static table weight of 50 lbs (22.7 kg) and a lifting table weight of 25 lbs (11.5 kg).
Ventilation System350 - 400 CFM (595-680 m3/hr) external exhaust to the outside or internal filtration system is required. There is one output port, 4" in diameter.

Exhaust and Filtration Units

All lasers need to either exhaust to the outside or use an internal filtration unit to clean the air of dust and debris, so you can either use a filtration or exhaust unit listed above or source one on your own. The Zing 24 laser recommends an exhaust fan that is rated at a minimum of 350 CFM for external exhaust. Factors such as length and type of tubing from the Epilog laser to the exhaust fan and from the exhaust fan to the outside of the building can produce significant losses on the true amount of air that is drawn from the Epilog laser.

 

The D3 Portable Exhaust Unit will require metal ducting leading to and from the laser system and exhaust fan. It attaches to a 4" exhaust port on the back of the laser system. 

 

We have two available ventilation options online:

 

 

For more information, call us at 303-277-1188. 

 

 

Rotary Attachment

The Rotary Attachment adds the ability to engrave bottles, glasses, flashlights, and other cylindrical items. It has been built to accommodate a large variety of shapes and sizes. The attachment easily adjusts for different lengths and will even rotate cylinders that have different diameters on each end. So intuitive and easy to use, you can change from one glass to the next in seconds without removing the attachment from the engraver. 

 

Air Assist Pump

Epilog's optional Air Assist Pump (air compressor) is available to work with the included Air Assist features of the laser systems. Direct a constant stream of air to your cutting surface to remove heat and combustible gases from the work area.

 

This high-quality air compressor unit feeds 30 psi of air through the Air Assist structure, giving you the best cutting results available. The rubber vibration-dampening feet reduce the noise level of the compressor, and connection is a breeze with our quick-connect inlet and outlet ports on the compressor and the laser system.

 

Cutting Grid

The Vector Cutting Grid on the Epilog Zing laser is used to lift materials being cut above the work surface. This allows the laser beam to pass cleanly through the material you are cutting and dramatically reduces underside reflections.

 

The air space below the vector grid is connected to the exhaust, so smoke is removed not only from the top side of the material, but also from the underside.

 


 

 Zing 16Zing 24Mini 24HelixFiberMark S2Fusion Pro 32Fusion Pro 48
Max Engraving Area16" x 12" (406 x 305 mm)24" x 12" (610 x 305 mm)24" x 12" (610 x 305 mm)24" x 18" (610 x 457 mm)24" x 12" (610 x 305 mm)32" x 20" (812 x 50 mm)48" x 36" (1219 x 914 mm)
Max Material Thickness4.5" (114 mm)7.75" (197 mm)5.5" (140 mm). Remove table for 8" (203 mm) depth and 23.5" x 11.75" (597 x 298 mm) engraving area. 8.5" (216 mm). Remove table for 11" (279 mm) depth and 23.5" x 17" (597 x 432 mm) engraving area.5.0" (127 mm)12.25" (311 mm)12.25" (311 mm)
Laser Tube TypesCO2CO2CO2CO2FiberCO2, Fiber, or DualCO2, Fiber, or Dual
Available online?YesYesYesYesContact Your DistributorContact Your DistributorContact Your Distributor
 For wattages unavailable online or to purchase directly with distributor, find your distributor here.
 Rotary Max DiameterN/A5.25" (133 mm)5" (127 mm)8" (203 mm)4" (101 mm)10.25" (260 mm)10.25" (260 mm)
Motor TypeStepperStepperServoServoServo ServoServo
Speed48 IPS48 IPS80 IPS80 IPS80 IPS165 IPS165 IPS
Maximum DPI1000 dpi1000 dpi1200 dpi1200 dpi1200 dpi1200 dpi1200 dpi